Air Conditioning & 300
In the movie ‘Three Hundred’, the Spartans held back the Persian Army, the most powerful army in the world at the time, from entering their country because of a pass too small for a lot of men to enter. This restriction created the opportunity for a small force to compete with an army that was much larger. The same basic concept is true in the home air conditioning system. Installing a new high efficiency system in your home is like the Persian Army trying to invade, with the efforts being thwarted by too small of a pass to fit through. The army, now being air flow, cannot get to the battlefield; the rooms in your house, no matter how great the system can’t win the fight against heat and humidity.
Home Comfort System: Each Component Matters
The home comfort system is only as good as the corridors that carry the air. The system must be designed so that it gets the air to where it needs to be, with the proper force and velocity to overtake the enemy. Under-sized returns, improperly sized supply trunks can hold back the cool dry air from doing its job removing heat and humidity. The design phase is extremely important. If your system is not designed properly, meaning system sizing as well as duct work, you are going to be left with hot and cold spots, uncomfortable rooms, utility and repair bills that are higher than they needed to be. This means that you could be replacing the system before its time to do so.
Existing Home Update Example: Correcting Poor Design
Original return air design for this 1967 San Antonio home were too small for the system. The home owner was frustrated with the AC company who installed the system due to the lack of performance and mold starting to form on the outside area of the evaporator coils. After testing and calculating we determined air velocity was insufficient for the unit which was allowing mold to grow and not cooling the home efficiently.
The new air returns we installed were larger and contain a slow for the air filter. We added an additional air return as seen in the featured image. The larger returns allow the correct amount of return air to enter the system. With the filters in the grills the air is sucked in from the rooms into the cavity under the closet and up through the system with enough velocity to treat the mold issue.
We Don’t Guess, We TEST!
TASCO runs a heat load on our replacement systems to ensure it is properly sized. We also perform a flow hood test, to see how efficiently your duct work is supplying air to each area of the home. These measurements and calculations are paramount in the efficiency and comfort the new system will provide. If we don’t calculate how the supply and return ducts affect the efficiency and just replace an old aging system for a new hi efficiency system, you are only going to enjoy a fraction of the comfort and cost effectiveness that the system is designed to provide.
So when you are thinking about replacing your system, or you begin noticing that you have uncomfortable rooms in your home, make sure any HVAC contractor that comes to give an estimate looks at all the variables that are involved with efficiency and comfort, now you know what those factors are. And everyone remember; ‘If it has to be right it has to be TASCO’.
One of the most important fixtures of any home is the home’s heating and cooling system. Modern advents in technology have led to both simpler, more efficient systems and more informed homeowners. However, even the most educated homeowners are sometimes uniformed about how important their duct system is. The furnace or air conditioner can often be thought of as the star of the show; they generate the conditioned air that keeps a home comfortable. But if the conditioning units are the stars of the show, there simply wouldn’t be a show without the ducts. In San Antonio, whatever the season, homes need conditioned air flowing through them in the most efficient ways. However, duct repair is often neglected, if it is considered at all. Why? According to EnergyStar, 20% of conditioned air leaks out due to ducts needing duct repair. The result isn’t academic, as homes in San Antonio and everywhere else can see higher utility bills and less comfortable homes as a result. Ducts needing duct repair can be spotted by looking at a few key factors.
Foremost among the signs that your San Antonio home needs duct repair is high energy bills; duct repair can help bring high energy bills down by efficiently delivering air throughout your home without leaks in the blistering San Antonio summer or the chilly San Antonio winter. Another sign that your home could benefit from duct repair is the consistent difficulty to heat or cool specific rooms. Since homes needing duct repair cannot distribute air efficiently, these cold or warm spots will be hard to rid your home of. A kind of corollary to this problem in a home needing duct repair are stuffy, stagnant rooms that don’t seem to get air of any kind. This duct repair sign can make your home incredibly uncomfortable and put it a risk for more work needing to be done. Another sign of needing duct repair in a San Antonio home is if your ducts are in the attic, crawl space, or garage of your San Antonio home. The last sign of needing duct repair is the presence of tangled or kinked ducts, which can restrict air flow.
Whether your home is located in San Antonio or anywhere else, duct repair can be instrumental to keeping it comfortable. Vigilance for these signs and regular inspection by a duct repair specialist can ensure your home is comfortable.
As the so called “polar vortex” descended on unsuspecting South Texans, many of them ran for their furnaces after what had been a seemingly mild winter. Nary a snowflake had fallen—as usual—and the cold, biting winter days in South Texas that Mother Nature normally saves for late January were all of the sudden upon us, and an unforeseen cold snap suddenly had a lot of Texas homeowners thinking about furnaces. And, while some raised their thermostats and went on, some Texas homeowners were left in the lurch when their furnace needed furnace repair San Antonio. The thing about needing furnace repair San Antonio is the time between knowing you need furnace repair San Antonio and the time your furnace repair San Antonio technician can inspect your unit seems infinite. From the perspective of a homeowner, there are few things worse than an uncomfortable home, and a furnace needing furnace repair needing furnace repair San Antonio can make any home uncomfortable in a hurry.
As we’ve written before, a furnace is a very complex machine with an incredible responsibility, and even those South Texas who woke up and ran for their thermostats for warm air issuing from their registers may still be missing something even though they didn’t need furnace repair San Antonio. While warm air might circulating through their homes and keeping their families moderately comfortable, that air might not be being distributed as efficiently as it could be and, worse yet, the ducts carrying that air could be faulty, which could result in wasted dollars on your energy bill. To best understand if your system is running efficiently, call your local furnace repair technician and schedule what is known as flow hood testing. Flow hood testing is a quick and easy way to ascertain whether your system is operating optimally, and flow hood testing can help any homeowner diagnose pathways to fixing their air flow situation other than just furnace repair San Antonio. While furnace repair San Antonio is essential and furnace repair San Antonio is key once a given heating unit has stopped working, flow hood testing is essential in discovering whether the furnace is giving you the best value for your money.
A few signs that flow hood testing may be necessary is the type of airflow in your house and, more importantly, whether or not your house is evenly heated. Many homeowners rushing to schedule furnace repair San Antonio actually have working units, and flow hood testing bears this out. Flow hood testing is done by a professional furnace repair San Antonio technician places a device known as a flow hood over your supply register. Sensors measuring flow hood testing will be able to quickly and accurately inform any homeowner if the drafty, uneven feeling in their home is a result of needing furnace repair San Antonio or if the air flow is truly to blame. Of course, as with furnace repair san Antonio, the necessity for flow hood testing speaks for itself. Why subject your furnace to all the work if the air isn’t being distributed correctly. As we’ve discussed before, many factors can lead to needing furnace repair San Antonio, but an overworked furnace with an air supply in need of flow hood testing is definitely on the list. Not only can that overworked furnace eventually need furnace repair San Antonio sooner, it will also seriously dent your energy savings in the process.
Another way in which flow hood testing directly benefits the homeowner is their pocketbook, but not just for the energy savings an efficient system in need of no furnace repair San Antonio can provide. CPS itself rebates for the test, which is in the best interest of any homeowner seeking to maximize the efficiency of their air flow system. Flow hood testing measures the amount of air flowing through the supply register, which can be irregular due to many factors. One of the most common factors is, of course, furnaces in need of furnace repair San Antonio. Other factors can be just as serious. For example, flow hood testing often uncovers undersized or otherwise incompatible duct work. Duct work is of course important, because it serves as the transport system for your conditioned air and runs all throughout your home. Leaky, undersized or otherwise inappropriate duct work can result in uneven heating of a home, and fool a homeowner into thinking they need furnace repair San Antonio. Your furnace repair San Antonio technician will travel to all the supply registers in your house, using flow hood testing to see if their air flow is abnormal. Should your furnace repair San Antonio technician find your duct work to be at fault through the flow hood testing process, you could qualify for CPS energy rebates which will help you replace your inappropriate ducts. While some homeowners may be daunted by furnace repair San Antonio and flow hood testing, they fail to see the big picture. A comfortable home is home, and an uncomfortable home, in need of flow hood testing on its registers or furnace repair San Antonio, is no home at all. Do you need flow hood testing or furnace repair San Antonio? There is only one way to find out, schedule a service call with your local furnace repair San Antonio specialist, who can not only diagnose if you need furnace repair San Antonio, but also perform flow hood testing to increase your energy efficiency and garner you CPS energy rebates as well. Furnace repair San Antonio and flow hood testing are effective tools that can benefit any home in need of furnace repairs or with faulty air flow. And remember, flow hood testing and furnace repair San Antonio is extremely important and difficult, consumers should consult their furnace repair San Antonio technician instead of trying to perform furnace repair San Antonio themselves. So, if your house is drafty or just cold, don’t hesitate and schedule your furnace repair San Antonio and your flow hood testing today!
TASCO Air Conditioning provides prompt furnace repair and flow hood testing to ensure your system is running safely and efficiently.
Let’s put ourselves in this home owner’s shoes.
My house was not comfortable and I didn’t understand why. My current AC repair technician couldn’t figure out what the problem with my air conditioner is after several very expensive service calls. I begin asking around about more reputable San Antonio air conditioning repair companies. My friend referred me to their ac repair company called TASCO.
One of their technicians came out the same day I called to see what the problems were with my air conditioning system. The technician came in and discussed a list of questions called Comfort Concerns with me. The comfort concerns list asked questions such as; “Are there any areas that get too warm or too cold?” “Does anyone in your family suffer from asthma or airborne allergens?” “Are you concerned about future energy costs?”
I mentioned that there were several rooms in my house that are hotter than the others and the first technician couldn’t figure out the problem. The TASCO technician asked to perform a test called the Flow Hood Test to see how well the air conditioning unit was working in my house.
I watched as the technician placed a funnel type structure called the flow hood over the supply register. The flow hood measures how much air is coming in through the supply air vent to see how much air was coming out. He repeated this process on every supply register in my house.
After testing each area we sat down and discussed the results. The technician explained to me that the duct work was under sized and it must be correctly sized installed so that the system will run efficiently and provide greater comfort.
The following day, two TASCO technicians arrived on time at my house ready to install new duct work that qualified for rebates. Within a day’s time, my system had new duct work and my house finally was comfortable and livable.
I now know why my friend referred me to TASCO. After this quick and efficient experience with TASCO I will continue to trust and call TASCO for my air conditioning repair needs.